\documentclass[b5paper, 11pt]{article}
\usepackage{cryptology2016-style}
\usepackage{epstopdf}
%-----------Title and Authors----------%
\title{\vspace{-1.0cm}\Large \bf Title of the Article}
\author[1]{\textbf{Author A$^\textbf{*}$}}
\author[1,2]{\textbf{Author B}}
\author[2]{\textbf{Author C}}
\affil[1]{Department of Typography, Name of University}
\affil[2]{Department of Templates, Name of University}
\date{\textit{E-mail: author@uni.edu \\$^*$Corresponding author}}

%-----------Headers----------%
\newcommand\ttitle{The Title of the Article} % title for header
\newcommand\authors{Author A, Author B \& Author C} % authors for header
%\date{Received: date \ Accepted: date}
%----------Title---------- %

\begin{document}
\maketitle
\thispagestyle{firstpage}

%----------Abstract---------- %


\begin{abstract}
The abstract should summarize the context, content
and conclusions of the paper in less than 200 words. It should not contain any references or displayed equations.  

\begin{keywords}
A comma separated list of keywords goes here
\end{keywords}
\end{abstract} 
%----------Main body----------%
\section{Introduction}	
Manuscripts should be checked for English grammar prior to submission for peer-review process. Abbreviations in the main text are allowed but should be spelt out in full when first used. Upon acceptance, authors are required to submit their source files including bibliography database .bib file and eps files for figures.

\section{Main Sections}

Here goes the main text of the paper.

\subsection{Subsections}\label{sub}

Subsections should be typeset in boldface italic and capitalize the first letter of the first word only.

\subsubsection{Sub-subsection}

Typeset sub-subsections in medium face italic and capitalize the first letter of the first word only. 

\subsection{Numbering and spacing}

Sections, subsections and subsubsections are numbered in Arabic. Use double spacing before all section headings, and single spacing after section headings. Flush left all paragraphs that follow after section headings.

\section{Equations}

Displayed equations should be numbered consecutively in each section, with the number set flush right and enclosed in parentheses

\begin{equation}
\mu(n,t)=\frac{\sum^\infty_{i=1} 1(d_i < t, N(d_i)= n)}{\int^t_{\sigma=0} 1(N(\sigma) = n)d\sigma}\,.
\label{diseqn}
\end{equation}

Equations should be referred to in abbreviated form, e.g.~``Eq.~\eqref{diseqn}'' or ``(2).'' In multiple-line equations, the number should be given on the last line.

Displayed equations are to be centered on the page width. Standard English letters like x are to appear as $x$ (italicized) in the text if they are used as mathematical symbols. Punctuation marks are used at the end of equations as if they appeared directly in the text.

\section{Tables}
Tables should be inserted in the text as close to the point of reference as possible. 

Tables should be numbered sequentially in the text in Arabic
numerals. Captions are to be centralized below the tables (see Table \ref{tbl}). 

\begin{table}
\begin{center}
\begin{tabular}{c | c | c | c}
\hline\hline
Piston mass & Analytical frequency & TRIA6-$S_1$ model &
\% Error \\ \hline
& (Rad/s) & (Rad/s) \\ %\colrule
1.0\hphantom{00} & \hphantom{0}281.0 & \hphantom{0}280.81 & 0.07 \\
0.1\hphantom{00} & \hphantom{0}876.0 & \hphantom{0}875.74 & 0.03 \\
0.01\hphantom{0} & 2441.0 & 2441.0\hphantom{0} & 0.0\hphantom{0} \\
0.001 & 4130.0 & 4129.3\hphantom{0} & 0.16\\ \hline
\end{tabular}
\caption{Comparison of acoustic for frequencies for piston-cylinder problem.}
\label{tbl}
\end{center}
\end{table}

If tables need to extend over to a second page, the continuation of the table should be preceded by a caption, e.g.~``{\it Table 2.} $(${\it Continued}$)$''.

\section{Theorem Environments}

\begin{theorem}
Theorems, lemmas, propositions and corollaries are to be numbered consecutively in the paper or in each section. Use italic for the body and upper and lower case boldface$,$ for the declaration.
\end{theorem}

\begin{remark}
Remarks, examples, definitions are to be numbered
consecutively in the paper or in each section. Use roman for the body and upper and lower case boldface$,$ for the declaration.
\end{remark}

\begin{proof}
The word `Proof' should be type in boldface. Proofs
should end with a box.
\end{proof}

\section{Footnotes}
Footnotes should be numbered sequentially in superscript
lowercase roman letters.\footnote{Footnotes should be
typeset in 8 pt roman at the bottom of the page.}

\section{Figures}
Figures are to be embedded in the text nearest their first reference and sequentially numbered in Arabic numerals. 

\begin{figure}[ht!]
\begin{center}
\includegraphics[width=7cm]{test-figure0.eps}
\caption{A schematic illustration of dissociative recombination. The direct mechanism, 4m$^2_\pi$ is initiated when the molecular ion S$_{\rm L}$ captures an electron with
kinetic energy. 
}
\label{f1}
\end{center}
\end{figure}
Figures should be black and white (or half-tone) and of a good resolution and sharpness. Compressed formats, such as JPEG, should not use heavy compression, which introduces undesirable artifacts. 

Previously published material must be accompanied by written
permission from the author and publisher.


\section*{Acknowledgments}

This section should come before the References. Dedications and funding information may also be included here.

\appendix

\section{Appendices}

Appendices should be used only when absolutely necessary. They should come before the References. If there is more than one appendix, number them alphabetically. Number displayed equations occurring in the Appendix in this way, e.g.~(\ref{app1}), (\ref{app2}), etc.
\begin{eqnarray}	%A.1
\begin{array}{rcl}
g_{\mu_1\mu_2} &=& g_{axby}=-\displaystyle{\epsilon_{abc}}{4\pi}\,
\frac{(x-y)^c}{|x-y|^3}\,, \\[8pt]
h_{\mu_1\mu_2\mu_3} &=& \epsilon^{\alpha_1 \alpha_2 \alpha_3}
g_{\mu_1\alpha_1}g_{\mu_2\alpha_2}g_{\mu_3\alpha_3}
\end{array}
\label{app1}
\end{eqnarray}
with
\begin{eqnarray}	%A.2
\epsilon^{\alpha_1 \alpha_2 \alpha_3} = \epsilon^{b_1y_1b_2y_2cx} =
\epsilon^{b_1b_2c}\delta(x-y_1)\delta(x-y_2)\,.
\label{app2}
\end{eqnarray}

\section{References}

References are to be listed in the order cited in the text in Arabic numerals.  They should be listed according to the style shown in the References. Typeset references in 9 pt roman.

References in the text can be typed as follows,
e.g.: ``$\ldots$ have proven \citep{pier02} that
this equation $\ldots$'' or after punctuation marks:
``$\ldots$ in the statement \citep{bake72}''. This is
done using LaTeX command: ``$\backslash$citep\{name\}''.

When the reference forms part of the sentence, it should be typed as follows, e.g.: ``One can show from
Ref. \cite{hear94} that $\ldots$'', ``See
Refs. \cite{bria84} and \cite{lamp94} for more details.''
This is done using the LaTeX
command: ``Ref.$\sim\backslash$cite\{name\}''.

%-----------Bibliography---------- %
\bibliographystyle{cryptology2016-bib-style}
\bibliography{cryptology2016-article-template}   
\end{document}
sasasasa